Rollers use the pressure generated by a pair or a group of rollers when rolling to roll steel. They are mainly subject to the dynamic and static loads, wear and temperature changes
Oct 30, 2024
Rollers are subjected to bending, friction, impact, and other effects during the rolling process, which mainly cause peeling and wear of the roll surface. Therefore, the roll surfa
Oct 28, 2024
Compared with traditional metal elements such as iron, copper, and nickel, zirconium has a lower density and a smaller coefficient of thermal expansion. In addition, it has a low t
Oct 24, 2024
Zirconium has excellent corrosion resistance and can resist corrosion from most organic acids, inorganic acids, strong alkalis and some molten salts. Therefore, some key components
Oct 22, 2024
Tantalum capacitor, full name tantalum electrolytic capacitor, is an electrolytic capacitor that uses metal tantalum as anode material. It has excellent performance such as small s
Oct 17, 2024
The alkaline cleaning process is a method of cleaning the metal surface with an alkaline solution, aiming to remove oxides, oil stains, and other impurities on the surface to
Oct 16, 2024
Common Refractory Metal Inlaid Electrodes include the following three categories: Copper inlaid tungsten electrode: suitable for welding copper products, with long service life, an
Oct 09, 2024
Sep 23, 2024
Molybdenum tubes' high melting point, high-temperature resistance, excellent thermal conductivity, corrosion resistance, and deformation make them occupy an important position
Sep 10, 2024
1. Production process (1) Powder metallurgy: By compressing metal powder into a mold, sintering and other processes, it mainly includes mixing, pressing, sintering, post-processing
Sep 03, 2024
Invar alloy, also known as low expansion alloy and Yin steel, is a magnetic metal alloy composed of iron (Fe) and nickel (Ni). The main components are 36% nickel and 64% iron, with
Aug 27, 2024
Cobalt is an iron alloy element with a high melting point and hardness. It is one of the commonly used additive elements in modern tool manufacturing. Adding an appropriate amount
Aug 12, 2024
