2.4606 The Stainless Steel Rod

Our firm sticks to the basic principle of 'Quality is the life of your company, and status will be the soul of it' for Beryllium Copper Wire, Beryllium Copper Foil, Pure Nickel Metal. We always deliver our customers' requirements and expectations to the whole value chain of our company accurately and build high quality processes together. It is a good way to enhance our products and solutions and repair. We are willing to carry out a wide variety of economic and technological cooperation with friends from all walks of life on the basis of equality and mutual benefit to win a bright future!

FANMETAL supply the Cobalt Base Alloy hardfacing service with Cobalt Base Alloy welding rod or powder to improve the hardness and corrosion resistance of the base material including Duplex, Super Duplex , Inconel 625, Monel 400 series St and SS 316 with hardfacings of Cobalt Base Alloy* (Cobalt base) or (Nickel base) alloys.

Cobalt Base Alloy Hardfacing alloy contains 25-33% chromium, 3-21% tungsten, and 0.7-3.0% carbon. As the carbon content increases, the metallographic structure changes from hypoeutectic austenite + M7C3 eutectic to hypereutectic M7C3 primary carbide + M7C3 eutectic. The more carbon content, the more nascent M7C3, the greater the macroscopic hardness, and the improved abrasive wear resistance, but the impact resistance, weldability, and machining performance will all decrease. Cobalt Base Alloy alloy alloyed with chromium and tungsten has good oxidation resistance, corrosion resistance and heat resistance. It can still maintain high hardness and strength at 650℃, which is an important feature that distinguishes this type of alloy from nickel-based and iron-based alloys.

Cobalt Base Alloy Hardfacing Service Picture:

After machining, Cobalt Base Alloy alloy has low surface roughness, high scratch resistance and low friction coefficient. It is also suitable for adhesive wear, especially on sliding and contacting valve sealing surfaces. However, in high-stress abrasive wear, the wear resistance of low-carbon cobalt-chromium-tungsten alloy is not as good as that of low-carbon steel. Therefore, the selection of expensive Cobalt Base Alloy alloy must be guided by professionals in order to maximize the potential of the material. . There are also Cobalt Base Alloy surfacing alloys containing Laves phases alloyed with chromium and molybdenum, such as Co-28Mo-17Cr-3Si and Co-28Mo-8Cr-2Si. Due to the lower hardness of Laves compared to carbides, the material that is paired with it in the metal friction pair wears less.

Note: Cobalt Base Alloy is a trademark of Deloro Cobalt Base Alloy, USA.

Through continuous innovation, we have formed an advanced technology system in the development of 2.4606 The Stainless Steel Rod. We always deliver our customers' requirements and expectations to the whole value chain of our company accurately and build high quality processes together. The company has formed a before-sale and after-sales standardized marketing service network throughout the country to provide high-quality and fast services to new and old customers. The company follows the tenet of "integrity, quality, and speed, creating wealth for customers, and building a corporate image." The attitude of sincere cooperation and the majority of users will work together to create a brilliant tomorrow.

Hot Tags: Cobalt Base Alloy Hardfacing, suppliers, manufacturers, factory, customized, wholesale, price, quotation, for sale, Pure Zirconium Metal Rod, beryllium x ray tube, Elkonite Tungsten Copper Alloy, nb target, Pure Nickel Rod, C18150 Copper Alloy